TM-9-2350-260-20-1-3

TANK, COMBAT, FULL TRACKED 105-MM GUN, M60 2350-00-678-5773 (HULL)

TECHNICAL MANUAL; ORGANIZATIONAL MAINTENANCE VOLUME 3 OF 4 CHAPTERS 10 THRU 15

TM-9-2350-260-20-1-3 - Page 276 of 783

TM 9-2350-260-20-1-3

ENGINE OIL HIGH TEMPERATURE SWITCH REPLACEMENT (2A ENGINE)(Sheet 1 of 2)

TOOLS: 15/16 in.

deep well socket with 1/2 in.

drive

Ratchet with 1/2 in.

drive

15/16 in.

socket with 1/2 in.

drive

SPECIAL TOOLS:

Ground Hop kit (Item 30, Chapter 3, Section I)

SUPPLIES:

Rags (Item 65, Appendix D)

Sealing compound (Item 20, Appendix D)

PRELIMINARY PROCEDURE:

Remove powerplant (page 5-2)

REMOVAL:

1.

Disconnect electrical lead (A) from oil high temperature switch (B).

2.

Place rags (Item 65, Appendix D) under and around switch (B).

3.

Using 15/16 in.

deep well socket, remove switch (B).

4.

Using 15/16 inch socket, remove bushing (C).

INSPECTION:

Inspect bushing (C) for cracks and crossed threads.

Replace as necessary.

Go on to Sheet 2

TA147296

10-264