TM-9-2350-260-20-1-3

TANK, COMBAT, FULL TRACKED 105-MM GUN, M60 2350-00-678-5773 (HULL)

TECHNICAL MANUAL; ORGANIZATIONAL MAINTENANCE VOLUME 3 OF 4 CHAPTERS 10 THRU 15

TM-9-2350-260-20-1-3 - Page 281 of 783

TM 9-2350-260-20-1-3

ENGINE OIL LOW PRESSURE SWITCH REPLACEMENT (2A ENGINE)(Sheet 2 of 2)

INSTALLATION:

1.

Lightly coat threads of bushing (A) and oil low pressure switch (B) with sealing compound (Item 20, Appendix D).

2.

Using socket, install bushing into engine.

3.

Using wrench, install oil low pressure switch (B) onto bushing (A).

4.

Connect electrical lead (C) to switch (B).

5.

Fill engine with oil (LO 9-2350-260-12).

6.

Connect engine for powerplant ground hop (page 5-54).

7.

Start and run engine.

Observe oil temperature indicator for normal oil temperature.

(TM 9-2350-260-10).

8.

Shut down engine.

Disconnect engine from powerplant ground hop (page 5-67).

9.

Install powerplant (page 5-14).

End of Task

TA147301

10-269