TM-9-2350-260-20-1-3

TANK, COMBAT, FULL TRACKED 105-MM GUN, M60 2350-00-678-5773 (HULL)

TECHNICAL MANUAL; ORGANIZATIONAL MAINTENANCE VOLUME 3 OF 4 CHAPTERS 10 THRU 15

TM-9-2350-260-20-1-3 - Page 267 of 783

TM 9-2350-260-20-1-3

HEADLIGHT HARNESS BASE ASSEMBLY REPLACEMENT (Sheet 3 of 4)

INSTALLATION:

1.

Place new gasket (A) in position on tank.

2.

Apply silicone compound to six electrical connectors

(B).

3.

Insert seven leads (B)(one at a time) through hole in

tank.

4.

Place base assembly (C) in position on gasket (A).

5.

Using 7/16 inch wrench, install three screws (D) and

flat washers (G) securing base assembly (C) to tank.

NOTE

Make sure to connect connectors

properly.

Use metal tags for

identifying proper connections.

6.

From inside of tank, connect six connectors (B) by

pushing together.

7.

Using 5/16 inch wrench, install new lockwasher (F),

ground lead (G), and screw (H) securing ground

lead to hull.

Go on to Sheet 4

TA147287

10-255