TM 9-2350-260-20-1-3
HEADLIGHT ASSEMBLY REPAIR (LEFT AND RIGHT) (Sheet 2 of 8)
3.
Remove round rubber seal (E).
4.
Using Phillips screwdriver, remove two screws and
lockwashers (F).
5.
Using fingers, remove retainer (G), two rubber seals
(H), and lens (J).
6.
Using flat-tip screwdriver, loosen four captive screws
(K).
7.
Remove headlight cover (L).
8.
Using fingers, remove seal (M).
9.
Using Phillips screwdriver, remove two screws (N)
with assembled washers.
Remove retainer (P).
10. Using fingers, remove filter (Q), rubber seal (R), lens
(S), and seal (T).
Go on to Sheet 3
TA147278
10-246