TM-9-2350-260-20-1-3

TANK, COMBAT, FULL TRACKED 105-MM GUN, M60 2350-00-678-5773 (HULL)

TECHNICAL MANUAL; ORGANIZATIONAL MAINTENANCE VOLUME 3 OF 4 CHAPTERS 10 THRU 15

TM-9-2350-260-20-1-3 - Page 253 of 783

TM 9-2350-260-20-1-3

TAILLIGHT GROMMET REPLACEMENT (Sheet 1 of 1)

TOOLS:

Flat-tip screwdriver Hand hacksaw

SUPPLIES:

Silicone compound (Item 32, Appendix D)

Grommet (7970128)

Sandpaper (Item 51, Appendix D)

PRELIMINARY PROCEDURES:

Remove transmission shroud (page 9-20)

Remove taillight from tank (page 10-229)

(Right) or 10-235 (Left)

1.

Using hacksaw, cut inside end from grommet.

2.

Using screwdriver, pry out grommet and throw

grommet away.

3.

Using sandpaper, clean out grommet cavity.

INSTALLATION:

1.

Apply silicone compound (Item 32, Appendix D) to

new grommet.

2.

Install new grommet by pushing in until seated.

3.

Install taillight in tank (page 10-232) (Right) or

10-237 (Left).

4.

Install transmission shroud (page 9-28).

End of Task

TA147273

10-241