TM-9-2350-260-20-1-3

TANK, COMBAT, FULL TRACKED 105-MM GUN, M60 2350-00-678-5773 (HULL)

TECHNICAL MANUAL; ORGANIZATIONAL MAINTENANCE VOLUME 3 OF 4 CHAPTERS 10 THRU 15

TM-9-2350-260-20-1-3 - Page 246 of 783

TM 9-2350-260-20-1-3

RIGHT TAILLIGHT -STOPLIGHT ASSEMBLY REPAIR (Sheet 3 of 3)

ASSEMBLY:

1.

Inset two leads (A) through body assembly (B).

2.

Install socket and wiring assembly (C) by pressing in grommet (D).

3.

Using cross-tip screwdriver, install three screws (E).

4.

Using cross-tip screwdriver, install two screws (F) and two new lockwasher (G).

5.

Install two lamps (H).

6.

Coat new preformed packing gasket (J) with silicone

compound (Item 32, Appendix D) before installation.

7.

Place new preformed packing (J) in door assembly

(K).

NOTE

Wires are located at bottom of body

assembly (B) for positioning of door

assembly (K) as shown.

8.

Using flat-tip screwdriver, install six screws (L), door

assembly (K), and six retainer rings (M).

9.

Install taillight-stoplight assembly (page 10-231).

10. Perform test on taillight assembly (TM 9-2350-260-10).

End of Task

TA147266

10-234