TM-9-2350-260-20-1-3
TANK, COMBAT, FULL TRACKED 105-MM GUN, M60 2350-00-678-5773 (HULL)
TECHNICAL MANUAL; ORGANIZATIONAL MAINTENANCE VOLUME 3 OF 4 CHAPTERS 10 THRU 15
TM-9-2350-260-20-1-3 - Page 245 of 783
TM 9-2350-260-20-1-3
RIGHT TAILLIGHT -STOPLIGHT ASSEMBLY REPAIR (Sheet 2 of 3)
3.
Remove two stoplight and taillight lamps (E).
4.
Using cross-tip screwdriver, remove two screws (F) and two lockwashers (G).
Throw lockwashers away.
5.
Using Phillips screwdriver, remove three screws (H) from grommet (J).
6.
Remove socket and wiring assembly (K) with fingers by pressing out grommet (J) from body assembly (L).
CLEANING AND INSPECTION:
1.
Inspect taillight assembly for corrosion.
Corroded areas which cannot be cleaned with crocus cloth (Item 14,
Appendix D) or steel wool (Item 55, Appendix D) are cause for replacement of that item.
2.
Inspect taillight and components for cracks.
If any items are cracked, replace.
3.
Inspect for mechanical damage and wear.
If damaged or worn, replace.
Go on to Sheet 3
TA147265
10-133
Back to Top
