TM 9-2350-260-20-1-3
RIGHT TAILLIGHT -STOPLIGHT ASSEMBLY REPLACEMENT (Sheet 3 of 3)
INSTALLATION:
1.
Using silicone compound (Item 32, Appendix D) on
taillight leads (A), insert two leads through rubber
grommet (B).
2.
Using wrench, install two screws (C) and two new
lockwashers (D) on mounting bracket (E).
3.
Slide two shells (F) on taillight leads (A).
4.
Install two slotted washers (G) on leads (A) behind metal terminal.
5.
Connect tagged or taped taillight lead (H) to hull
connector number 24 (J).
6.
Connect remaining lead (K) to hull connector
number 23 (L).
7.
Install transmission shroud (page 9-23).
8.
Check
for
proper
taillight
operation
(TM 9-2350-260-10).
End of Task
TA147263
10-231