TM 9-2350-260-20-1-3
DOMELIGHT ASSEMBLY REPAIR (Sheet 8 of 8)
11. Using flat-tip screwdriver, install lead from white
socket assembly to connector (AF) which is marked
'W' on switch (Y).
12. Using flat-tip screwdriver, install lead from red socket
assembly to connector (AG) which is marked 'R' on
switch (Y).
13. Using fingers, install door gasket (AH) in gasket
groove of door assembly (K).
14. Using fingers, install eight captive screws (AJ).
15. Using needle nose pliers, install eight rings (AK) on
captive screws (AJ).
16. Using flat-tip screwdriver, install lead (AL) on
remaining connector of switch (Y).
17. Using flat-tip screwdriver, tighten eight captive
screws (AJ) securing door assembly (K) to body
assembly (AM).
18. Install domelight (page 10-217).
End of Task
TA147260
10-228