TM-9-2350-260-20-1-3

TANK, COMBAT, FULL TRACKED 105-MM GUN, M60 2350-00-678-5773 (HULL)

TECHNICAL MANUAL; ORGANIZATIONAL MAINTENANCE VOLUME 3 OF 4 CHAPTERS 10 THRU 15

TM-9-2350-260-20-1-3 - Page 232 of 783

TM 9-2350-260-20-1-3

DOMELIGHT RESISTOR ASSEMBLY REPLACEMENT (Sheet 2 of 2)

INSTALLATION:

1.

Position resistor assembly (A) in domelight resistor assembly bracket (B).

2.

Place new washers (C) and nut (D) on resistor

assembly (A).

3.

Using box wrench on nut (D) and plies on resistor

assembly (A), tighten nut (D).

4.

Open clamp (E) enough to insert wires of resistor

assembly (A).

5.

Place new lockwasher (F), flat washer (G), and

clamp (E) on screw (H).

6.

Using socket, tighten screw (H).

7.

Slide knob (J) on resistor assembly (A).

8.

Using allen wrench, tighten two setscrews (K).

9.

Connect electrical connector (L) and (M).

10. Perform functional test (TM 9-2350-260-10).

End of Task

TA147252

10-220