TM 9-2350-260-20-1-3
POWERPLANT WARNING LIGHT ASSEMBLY REPLACEMENT (Sheet 2 of 3)
5.
Using screwdriver, remove two screws (F).
6.
Remove door (G), lens (H), and gasket (J) from frame (K).
Throw gasket away.
7.
Press in on lamp (L), turn counterclockwise slightly, and remove.
CLEANING AND INSPECTION:
1.
Clean light deflector and lens with moist, lint-free cloth (Item 12, Appendix D).
2.
Using steel wool (Item 55, Appendix D) remove any corrosion from terminals in connector assemblies (E).
3.
Inspect all parts for damage or wear.
Replace any defective part.
Go on to Sheet 3
TA147246
10-214