TM-9-2350-260-20-1-3

TANK, COMBAT, FULL TRACKED 105-MM GUN, M60 2350-00-678-5773 (HULL)

TECHNICAL MANUAL; ORGANIZATIONAL MAINTENANCE VOLUME 3 OF 4 CHAPTERS 10 THRU 15

TM-9-2350-260-20-1-3 - Page 224 of 783

TM 9-2350-260-20-1-3

HEADLIGHT BEAM SELECTOR SWITCH ASSEMBLY REPLACEMENT (Sheet 1 of 1)

TOOLS: Cross-tip screwdriver

Spanner wrench

SUPPLIES: Lockwasher (MS35336-27) (2 required)

REFERENCE: TM 9-2350-260-10

REMOVAL:

1.

Using wrench, disconnect electrical connector (A).

2.

Using screwdriver, remove two screws (B) and

lockwashers (C).

Throw lockwashers away.

3.

Remove guard (D).

4.

Pull selector switch (E) toward driver's seat.

INSTALLATION:

1.

Place selector switch (E) in position on mounting bracket (F).

2.

Using wrench, connect electrical connector (A).

3.

Place guard (D) on selector switch (E).

4.

Using screwdriver, install two screws (B) and new lockwashers (C).

End of Task

TA147244

10-212