TM-9-2350-260-20-1-3

TANK, COMBAT, FULL TRACKED 105-MM GUN, M60 2350-00-678-5773 (HULL)

TECHNICAL MANUAL; ORGANIZATIONAL MAINTENANCE VOLUME 3 OF 4 CHAPTERS 10 THRU 15

TM-9-2350-260-20-1-3 - Page 220 of 783

TM 9-2350-260-20-1-3

INFRARED POWER SUPPLY AND SHOCK MOUNT ASSEMBLY REPLACEMENT

(Sheet 5 of 5)

6.

Position assembled power supply (K) onto mounting pad (Q) inside turret.

9.

Using same procedure as described in step 8,

except omitting clamp (U), install two screws (R),

new lockwashers (S), and new lockwashers (T) and

secure bracket (B) to mounting pad (Q).

7.

Install screw (R) through new lockwasher (S),

ground strap (M), bracket (B), and new lockwasher

(T).

Using 1/2 inch socket tighten screw (R) into

mounting pad (Q).

8.

Install screw (R) through new lockwasher (S), clamp

(U), bracket (B), and new lockwasher (T).

Using 1/2

inch socket tighten screw (R) into mounting pad (Q).

10. Using 1 inch wrench, install connector on cable (V) to power supply (K).

11. Using 7/8 inch wrench, install connector on cable (W) to power supply (K).

12. Close turret platform access coor (TM 9-2350-260-10).

TA147240

End of Task

10-208