TM-9-2350-260-20-1-3

TANK, COMBAT, FULL TRACKED 105-MM GUN, M60 2350-00-678-5773 (HULL)

TECHNICAL MANUAL; ORGANIZATIONAL MAINTENANCE VOLUME 3 OF 4 CHAPTERS 10 THRU 15

TM-9-2350-260-20-1-3 - Page 218 of 783

TM 9-2350-260-20-1-3

INFRARED POWER SUPPLY AND SHOCK MOUNT ASSEMBLY REPLACEMENT

(Sheet 3 of 5)

8.

Remove power supply (B) from bracket (L).

9.

Using 1/4 inch wrench to hold nut (S), use

screwdriver to remove two screws (T), washers (U),

and mount (V) from each end of both brackets (L).

INSPECTION:

1.

Inspect all parts for defects.

2.

Replace any defective parts.

NOTE

Mounting hardware used to mount power supply to brackets is same for both ends

of each bracket, except for end of bracket not shown on illustration.

Mounting

hardware for hidden bracket is described in step 4.

Go on to Sheet 4

TA147238

10-206