TM-9-2350-260-20-1-3
TANK, COMBAT, FULL TRACKED 105-MM GUN, M60 2350-00-678-5773 (HULL)
TECHNICAL MANUAL; ORGANIZATIONAL MAINTENANCE VOLUME 3 OF 4 CHAPTERS 10 THRU 15
TM-9-2350-260-20-1-3 - Page 209 of 783
TM 9-2350-260-20-1-3
BILGE PUMP RELAY ENCLOSURE ASSEMBLY REPAIR (Sheet 6 of 12)
Cable Assembly Replacement (Sheet 3 of 4)
CLEANING AND INSPECTION:
1.
Inspect all parts for corrosion.
If corroded part cannot be cleaned using crocus cloth (Item 14, Appendix D) or steel
wool (Item 55, Appendix D), replace parts.
2.
Inspect all parts for mechanical damage and wear.
If damaged or worn, replace parts.
INSTALLATION:
1.
Position gasket and cable assembly (A) into place
on enclosure assembly (B) with notch of cable
assembly facing 9 o'clock position as you face it.
2.
Using screwdriver, install four screws (C) with new
lockwashers and nuts.
3.
Place lead 450A onto terminal of circuit breaker (D).
4.
Using 7/16 inch socket, install screw (E) with mew
lockwasher and flat washer.
Go on to Sheet 4
TA147229
10-197
Back to Top
