TM-9-2350-260-20-1-3

TANK, COMBAT, FULL TRACKED 105-MM GUN, M60 2350-00-678-5773 (HULL)

TECHNICAL MANUAL; ORGANIZATIONAL MAINTENANCE VOLUME 3 OF 4 CHAPTERS 10 THRU 15

TM-9-2350-260-20-1-3 - Page 202 of 783

TM 9-2350-260-20-1-3

BILGE PUMP RELAY ENCLOSURE ASSEMBLY REPLACEMENT (Sheet 1 of 2)

TOOLS:

7/16 in. combination box and open end wrench

7/16 in. socket with 1/2 in. drive

Ratchet with 1/2 in. drive

5 in. extension with 1/2 in. drive

Spanner wrench

SUPPLIES: Lockwasher (MS35338-44) (4 required)

REFERENCE: TM 9-2350-260-10

PRELIMINARY PROCEDURES:Disconnect three battery ground straps (page 10-294)

Open turret platform access door and manually traverse turret to expose relay

(TM 9-2350-260-10)

REMOVAL:

1.

Using spanner wrench, disconnect electrical’

connector (A).

2.

Using wrench, remove screw and lockwasher (B)

below connector of relay (C).

Throw lockwasher

away.

3.

Using socket, remove three remaining screws and

lockwashers (D).

Throw lockwashers away.

4.

Remove relay © and four external tooth lockwashers

(E) from bracket.

Go on to Sheet 2

TA147222

10-190