TM-9-2350-260-20-1-3

TANK, COMBAT, FULL TRACKED 105-MM GUN, M60 2350-00-678-5773 (HULL)

TECHNICAL MANUAL; ORGANIZATIONAL MAINTENANCE VOLUME 3 OF 4 CHAPTERS 10 THRU 15

TM-9-2350-260-20-1-3 - Page 206 of 783

TM 9-2350-260-20-1-3

BILGE PUMP RELAY ENCLOSURE ASSEMBLY REPAIR (Sheet 3 of 12)

Circuit Breaker Replacement (Sheet 3 of 3)

INSTALLATION:

1.

Position circuit breaker (A) into position in enclosure assembly (B).

2.

Using screwdriver, install two screws (C) with flat washers and new lockwashers.

3.

Place two new lockwashers at position (D) on circuit

breaker and one flat washer at position (E) of relay.

Position bus bar (F) over new lockwasher at (D) and

(E).

4.

Using socket, install screw and two flat washers

through bus bar on circuit breaker at position (D).

5.

Using socket, install nut and flat washer to hold bus

bar at position (E).

6.

Using socket, install screw, flat washer, and new

lockwasher (G) to secure lead (H).

7.

Place cover (J) and new gasket (K) into installation

position on enclosure assembly (B).

8.

Using screwdriver, install four screws (L) and new

lockwashers (M).

9.

Install

enclosure

assembly

(B)

in

tank

(page 10-191).

End of Task

TA147226

10-194