TM-9-2350-260-20-1-3

TANK, COMBAT, FULL TRACKED 105-MM GUN, M60 2350-00-678-5773 (HULL)

TECHNICAL MANUAL; ORGANIZATIONAL MAINTENANCE VOLUME 3 OF 4 CHAPTERS 10 THRU 15

TM-9-2350-260-20-1-3 - Page 213 of 783

TM 9-2350-260-20-1-3

BILGE PUMP RELAY ENCLOSURE ASSEMBLY REPAIR (Sheet 10 of 12)

Solenoid Relay Replacement (Sheet 3 of 5)

13. Using fingers, remove ground lead (P) from solenoid

relay (Q).

14. Remove solenoid relay (Q) from relay enclosure

assembly (R).

CLEANING AND INSPECTION:'

1.

Visually inspect all parts for corrosion.

If corroded parts cannot be cleaned with crocus cloth (Item 14, Appendix D) or

steel wool (Item 55, Appendix D), replace parts.

2.

Visually inspect for technical damage and wear.

If damaged or worn, replace parts.

INSTALLATION:

1.

Position solenoid relay (A) into place in enclosure

assembly (B).

2.

Place ground lead (C) into position as shown.

3.

Using screwdriver, install two screws (D) with two

new lockwashers.

TA147233

Go on to Sheet 4

10-201