TM-9-2350-260-20-1-3

TANK, COMBAT, FULL TRACKED 105-MM GUN, M60 2350-00-678-5773 (HULL)

TECHNICAL MANUAL; ORGANIZATIONAL MAINTENANCE VOLUME 3 OF 4 CHAPTERS 10 THRU 15

TM-9-2350-260-20-1-3 - Page 230 of 783

TM 9-2350-260-20-1-3

DOMELIGHT RESISTOR ASSEMBLY BRACKET REPLACEMENT (Sheet 1 of 1)

TOOLS: 7/16 in. socket with 1/2 in. drive

Extension with 1/2 in. drive

Ratchet with 1/2 in. drive

SUPPLIES: Lockwasher (MS35333-40) (2 required)

PRELIMINARY

PROCEDURE:

Remove

resistor

assembly

(page 10-219)

REMOVAL:

1.

Using socket remove two screws (A), lockwashers

(B), and washers (C).

Throw lockwashers away.

2.

Remove clamp (D) and bracket (E).

INSTALLATION:

1.

Position bracket holes and clamp (D) with holes in

domelight assembly (F).

2.

Place new lockwashers (B) and washers (C) on two

screws (A).

3.

Insert through holes in positioned parts of step 1.

4.

Using socket, tighten screws (A).

5.

Install resistor assembly (page 10-220).

TA147250

End of Task

10-218