TM 9-2350-260-20-1-3
DOMELIGHT ASSEMBLY REPAIR (Sheet 2 of 8)
5.
Using flat-tip screwdriver, remove door gasket (G) by
inserting under gasket and lifting up.
6.
Using flat-tip screwdriver, remove two remaining
electrical leads (H) from switch (F).
7.
Using flat-tip screwdriver, remove screw (J) and
lockwasher (K) securing knob (L).
Remove knob (L).
Throw lockwasher (K) away.
8.
Using crescent wrench, remove nut assembly (M),
washer (N), and gasket (P).
Throw gasket away.
9.
Remove rotary switch (F).
Go on to Sheet 3
TA147254
10-222