TM-9-2350-260-20-1-3

TANK, COMBAT, FULL TRACKED 105-MM GUN, M60 2350-00-678-5773 (HULL)

TECHNICAL MANUAL; ORGANIZATIONAL MAINTENANCE VOLUME 3 OF 4 CHAPTERS 10 THRU 15

TM-9-2350-260-20-1-3 - Page 241 of 783

TM 9-2350-260-20-1-3

RIGHT TAILLIGHT -STOPLIGHT ASSEMBLY REPLACEMENT (Sheet 1 of 3)

TOOLS:

9/16 in.

combination box and open end wrench

SUPPLIES:

Silicone compound (Item 32, Appendix D)

Masking tape (Item 57, Appendix D)

Pencil

Lockwasher (MS35335-32)(2 required)

PRELIMINARY PROCEDURE:

Remove transmission shroud (page 9-20)

REMOVAL:

NOTE

Inspect leads (A) and leads (B) for

numbered tags (C) 23 and 24.

If leads

do not have tags, use masking tape

(Item 57, Appendix D) and pencil to

number leads.

1.

Reach

through

exhaust

door

opening

and

disconnect two leads (A) from hull connectors (B).

2.

Slide two connector shells (D) back on taillight leads

to expose two dotted washers (E).

NOTE

Lubricant may be needed on leads

(A) to remove shells (D).

3.

Remove two dotted washers (E) and two shells (D).

Go on to Sheet 2

TA147261

10-229