TM-9-2350-260-20-1-3

TANK, COMBAT, FULL TRACKED 105-MM GUN, M60 2350-00-678-5773 (HULL)

TECHNICAL MANUAL; ORGANIZATIONAL MAINTENANCE VOLUME 3 OF 4 CHAPTERS 10 THRU 15

TM-9-2350-260-20-1-3 - Page 247 of 783

TM 9-2350-260-20-1-3

LEFT TAILLIGHT - STOPLIGHT ASSEMBLY REPLACEMENT (Sheet 1 of 3)

TOOLS:

9/16 in.

combination box and open end wrench

SUPPLIES:

Silicone compound (Item 32, Appendix D)

Masking tape (Item 57, Appendix D)

Pencil

Lockwasher (MS35335-32) (2 required)

REFERENCE:

TM 9-2350-260-10

PRELIMINARY PROCEDURE:

Remove transmission shroud (page 9-20)

REMOVAL:

NOTE

Inspect leads (A) and leads (B) for

numbered tags (C).

If leads do not

have tags, use masking tape (Item 57,

Appendix D) and pencil to number

leads 21, 22, and 24.

1.

Reach

through

exhaust

door

opening

and

disconnect three leads (A) from hull connectors (B).

2.

Slide three connector shells (D) back on taillight

leads to expose three slotted washers (E).

NOTE

Lubricant may be needed on leads

(A) to remove shells (D).

3.

Remove three slotted washers (E) and three shells

(D).

Go on to Sheet 2

TA147267

10-235