TM-9-2350-260-20-1-3

TANK, COMBAT, FULL TRACKED 105-MM GUN, M60 2350-00-678-5773 (HULL)

TECHNICAL MANUAL; ORGANIZATIONAL MAINTENANCE VOLUME 3 OF 4 CHAPTERS 10 THRU 15

TM-9-2350-260-20-1-3 - Page 252 of 783

TM 9-2350-260-20-1-3

LEFT TAILLIGHT -STOPLIGHT ASSEMBLY REPAIR (Sheet 3 of 3)

ASSEMBLY:

1.

Insert three leads (A) through body assembly (B).

2.

Install socket and wiring assembly (C) by pressing in grommet (D).

3.

Using Phillips screwdriver, install three screws (E).

4.

Using Phillips screwdriver, install two screws (F) and new lockwashers (G).

5.

Install three lamps (H) and (J).

6.

Coat preformed packing gasket (K) with silicone

compound (Item 32, Appendix D) before installation.

7.

Place new preformed packing (K) on door assembly

(L).

NOTE

Wires are located at bottom of

housing (B) for positioning of door

assembly (L).

8.

Using flat-tip screwdriver, install six screws (M), door

assembly (L), and six retainer rings (N) on body

assembly (B).

9.

Install taillight-stoplight assembly (page 10-237).

End of Task

TA147272

10-240