TM-9-2350-261-10
CARRIER, M113A2, M577A2, M1064, M1068, M1059 AND M901A1
OPERATOR'S MANUAL
TM-9-2350-261-10 - Page 285 of 761
TM 9-2350-261-10
INSTALL/REMOVE M19 PERISCOPE
0042 00
THIS WORK PACKAGE COVERS:
Installation (page 0042 00-1).
Removal (page 0042 00-4).
INITIAL SETUP:
Maintenance Level
Operator
Personnel Required
Driver
Equipment Condition
Engine stopped (WP 0029 00)
Driver’s hatch cover closed (WP 0007 00)
Carrier blocked (WP 0050 00)
INSTALLATION
WARNING
HIGH VOLTAGE IN THE M19 periscope can cause serious injury or death. To avoid accidents:
ALWAYS connect power cable to periscope BEFORE turning MASTER SWITCH and I.R.
power switch to ON.
Always wait at least 2 minutes BEFORE you disconnect the power cable from the periscope
when turning I.R. POWER switch and MASTER SWITCH OFF.
NEVER disconnect the power cable from the periscope until the image disappears from the
periscope screen.
NEVER touch the end of the cable. Voltage could exceed 16,000 volts.
1.
Squeeze latches and push up on plug assembly to release plug assembly from quick release. Tilt plug assembly to
remove through opening in quick release.
004200-1
Back to Top
