TM-9-2350-261-10
CARRIER, M113A2, M577A2, M1064, M1068, M1059 AND M901A1
OPERATOR'S MANUAL
TM-9-2350-261-10 - Page 289 of 761
TM 9-2350-261-10
OPERATE M19 PERISCOPE
0043 00
THIS WORK PACKAGE COVERS:
Operate M19 Periscope (page 0043 00-1).
INITIAL SETUP:
Maintenance Level
Operator
Personnel Required
Driver
Equipment Condition
M19 periscope installed (WP 0042 00)
OPERATE M19 PERISCOPE
WARNING
HIGH VOLTAGE IN THE M19 periscope can cause serious injury or death. To avoid accidents:
ALWAYS connect power cable to periscope BEFORE turning MASTER SWITCH and I.R.
power switch to ON.
Always wait at least 2 minutes BEFORE you disconnect the power cable from the periscope
when turning I.R. POWER switch and MASTER SWITCH OFF.
NEVER disconnect the power cable from the periscope until the image disappears from the
periscope screen.
NEVER touch the end of the cable. Voltage could exceed 16,000 volts.
004300-1
Back to Top
