TM-9-2350-261-10
CARRIER, M113A2, M577A2, M1064, M1068, M1059 AND M901A1
OPERATOR'S MANUAL
TM-9-2350-261-10 - Page 295 of 761
TM 9-2350-261-10
INSTALL/REMOVE MACHINE GUN
0044 00
THIS WORK PACKAGE COVERS:
Installation (page 0044 00-1).
Removal (page 0044 00-3).
INITIAL SETUP:
Maintenance Level
Operator
Personnel Required
Soldier
Equipment Condition
Engine stopped (WP 0029 00)
Commander’s cupola locked at desired position
(WP 0013 00)
INSTALLATION
NOTE
On some carriers the traverse travel lock is an arm on left side of machine gun mount. On other
carriers the traverse travel lock is a hinged lug on right side of machine gun pintle. Both are
shown. If your carrier is equipped with traverse travel lock arm, go to Step 1. If it is equipped
with traverse travel lock lug, go to Step 2.
1.
Remove pin from commander’s cupola mount to release traverse travel lock arm.
004400-1
Back to Top
