TM-9-2350-261-10
CARRIER, M113A2, M577A2, M1064, M1068, M1059 AND M901A1
OPERATOR'S MANUAL
TM-9-2350-261-10 - Page 647 of 761
TM 9-2350-261-10
DRAIN FUEL FILTERS
0090 00
THIS WORK PACKAGE COVERS:
Drain (page 0090 00-1).
INITIAL SETUP:
Maintenance Level
Unit
Personnel Required
Driver
Materials/Parts
Wiping rag (WP 0096 00, Item 10)
Hose, 1/4 inch, 2 feet long
Suitable container
References
WP 0049 00
Equipment Condition
Engine stopped (WP 0029 00)
DRAIN
1.
Remove power plant rear access panels (WP 0049 00).
2.
Place a 2-foot length of 1/4 inch or other suitable bulk hose past the drive belts and idlers, and slip one end of the hose
over the drain valve. Run the other end of hose into a suitable container resting on the crew compartment floor in order
to catch the drained fuel. Open drain valve and remove bleed plug to drain filter.
CAUTION
Open drain valves slowly so you do not spill fuel on the power plant.
3.
Slowly open valve and let it run until all water is drained. When clean fuel starts to run from the fuel filter, close the
valve.
009000-1
Back to Top
