TM-9-2350-261-20-2

CARRIER, M113A2, M577A2, M1064, M1068, M1059 AND M901A1

TECHNICAL MANUAL; UNIT MAINTENANCE MANUAL - VOLUME 2 OF 4

TM-9-2350-261-20-2 - Page 237 of 1008

TM 9-2350-261-20-2

REPLACE WARNING PANEL LIGHTS

0251 00

THIS WORK PACKAGE COVERS:

Removal (page 0251 00-1).

Clean, Inspect, and Repair (page 0251 00-2).

Installation (page 0251 00-2).

INITIAL SETUP:

Maintenance Level

Unit

Tools and Special Tools

General Mechanic’s Tool Kit (WP 0780 00, Item 29)

Materials/Parts

Light bulbs, as needed

Lockwasher (2)

Personnel Required

Unit Mechanic

Equipment Condition

Engine stopped/shutdown (see your -10)

Carrier blocked (see your -10)

REMOVAL

NOTE

There are four lights on warning panel. Remove all lights the same way.

1.

Remove light bulb (1).

a.

Turn lens (2) counterclockwise. Remove lens and gasket (3) from light assembly (4).

b.

Push in and turn light bulb (1) counterclockwise and remove bulb from light assembly (4).

NOTE

Do not disconnect more than one light at a time. Mark each lead to make sure you reconnect to

correct contacts. See wiring diagrams at the end of this manual.

2.

Remove light assembly (4).

a.

Disconnect circuit lead (5) from light assembly (4).

b.

Remove two screws (6), lockwashers (7), and light assembly (4) from warning lights panel. Discard lockwashers.

025100-1