TM-9-2350-261-20-2

CARRIER, M113A2, M577A2, M1064, M1068, M1059 AND M901A1

TECHNICAL MANUAL; UNIT MAINTENANCE MANUAL - VOLUME 2 OF 4

TM-9-2350-261-20-2 - Page 374 of 1008

TM 9-2350-261-20-2

REPLACE REAR MAIN WIRING HARNESS (M577A2 AND M1068 ONLY) — Continued

0287 00

38. Install circuit 415 lead (1), circuit 59 lead (2), clamp (3), and new lockwasher (4) on weldnut (5). Secure with screw (6).

39. If NBC unit is installed, connect circuit 415 lead (1) to NBC unit.

40. Connect circuit 59 lead (2) to blower (7).

41. Install three circuit 48 leads (8) on bracket (9). Secure with 12 screws (10) and nuts (11).

42. Install cradle (12), circuit 48C capacitor (13), and new lockwasher (14) on weldnut (15). Secure with screw (16).

43. Install rear main wiring harness (17) on cradle (12). Secure with cradle clip (18).

44. Install three ground leads (19) and new lockwashers (20) on weldnut (21). Secure with screw (22).

0287 00-22