TM-9-2350-261-20-2

CARRIER, M113A2, M577A2, M1064, M1068, M1059 AND M901A1

TECHNICAL MANUAL; UNIT MAINTENANCE MANUAL - VOLUME 2 OF 4

TM-9-2350-261-20-2 - Page 365 of 1008

REPLACE REAR MAIN WIRING HARNESS (M577A2 AND M1068 ONLY) — Continued

65. Disconnect circuit 450 lead (7) from circuit breaker (8).

66. Disconnect circuit 450B lead (9) from circuit breaker (10).

67. Remove circuit 450 lead (7) and grommet (11) from distribution box (12). Discard grommet.

68. Remove circuit 450B lead (9) and grommet (13) from distribution box (12). Discard grommet.

69. Remove two nuts (1), mounts (2) and (3), flat washers (4), and screws (5) that secure instrument panel (6) to two struts

(7).

70. Support panel (6). Remove two screws (8), flat washers (9), one lockwasher (10), and ground lead (11) from two mounts

(12) and upper support (13). Discard lockwasher.

71. Support panel (6) on two struts (7) to gain access to rear of panel.

0287 00-13

0287 00

TM 9-2350-261-20-2