TM-9-2350-261-20-2

CARRIER, M113A2, M577A2, M1064, M1068, M1059 AND M901A1

TECHNICAL MANUAL; UNIT MAINTENANCE MANUAL - VOLUME 2 OF 4

TM-9-2350-261-20-2 - Page 369 of 1008

REPLACE REAR MAIN WIRING HARNESS (M577A2 AND M1068 ONLY) — Continued

NOTE

Do Steps 5 - 8 for M1068 only.

5.

Install new grommet (13) and new grommet (14) in battery box (7).

6.

Install circuit 6 lead (8) and circuit 31 lead (15) through grommet (13).

7.

Install circuit 48B lead (9) through grommet (14).

8.

Connect circuit 6 lead (8), circuit 48B lead (9), and circuit 31 lead (15) to terminal (10) with screw (11) and nut (12).

9.

Connect circuit 21 lead (1), circuit 22 lead (2), circuit 23 lead (3), and circuit 24 lead (4) to front main wiring harness.

10. Connect circuit 450 lead (5), circuit 450B lead (6), and circuit 451A lead (7) to bilge pump switch.

11. Connect circuit 38 lead (8) to instrument panel wiring harness.

12. Connect circuit 451B lead (9) to rear bilge pump ON indicator light.

13. Connect circuit 28 lead (10) to fuel gauge.

.

0287 00-17

0287 00

TM 9-2350-261-20-2