TM 9-2350-261-20-2
REPLACE REAR MAIN WIRING HARNESS (M577A2 AND M1068 ONLY) — Continued
0287 00
45. Disconnect circuit 59 lead (1) from blower (2).
46. Remove screw (3), lockwasher (4), clamp (5), circuit 59 lead (1), and circuit 415 lead (6) from weldnut (7). Discard
lockwasher.
47. If NBC unit is installed, disconnect circuit 415 lead (6) from NBC unit.
48. Remove four screws (8), nuts (9), and circuit 48 (10) from bracket (11).
49. Remove screw (12), two lockwashers (13), circuit 48 capacitor (14), and ground lead (15) from weldnut (16). Discard
lockwashers.
50. Remove six screws (17), clamps (18), and circuit 48 lead (10) from six weldnuts (19).
028700-9