TM-9-2350-261-20-2

CARRIER, M113A2, M577A2, M1064, M1068, M1059 AND M901A1

TECHNICAL MANUAL; UNIT MAINTENANCE MANUAL - VOLUME 2 OF 4

  TM-9-2350-261-20-2 - Page 359 of 1008

REPLACE REAR MAIN WIRING HARNESS (M577A2 AND M1068 ONLY) — Continued
31. Disconnect circuit 21 lead (1), circuit 22 lead (2), circuit 23 lead (3), and circuit 24 lead (4) from trailer wiring harness
(5).
32. Disconnect circuit 451 lead (6) from rear bilge pump (7).
33. Remove screw (8), clamp (9), two lockwashers (10), trailer wiring harness ground lead (11), and wiring harness (12)
from weldnut (13). Discard lockwashers.
34. Pull circuit 21 lead (1), circuit 22 lead (2), circuit 23 lead (3), circuit 24 lead (4) and circuit 451 lead (6) through opening
in transverse beam.
35. Remove two screws (14), clamps (15), and wiring harness (12) from two weldnuts (16).
36. Remove eight cradle clips (17) and wiring harness (12) from eight cradles (18).
37. Disconnect circuit 38C lead (19) from left dome light (20).
38. Disconnect circuit 38B lead (21) from front blackout light (22) and cables W28 and W35.
028700-7
0287 00
TM 9-2350-261-20-2


Back to Top