TM-9-2350-261-20-2

CARRIER, M113A2, M577A2, M1064, M1068, M1059 AND M901A1

TECHNICAL MANUAL; UNIT MAINTENANCE MANUAL - VOLUME 2 OF 4

TM-9-2350-261-20-2 - Page 387 of 1008

TM 9-2350-261-20-2

REPLACE REAR MAIN WIRING HARNESS (M1064 ONLY) — Continued

0288 00

6.

Remove nut (1), washer (2), and rubber bushing (3) around harness (4) from connector (5).

7.

Remove connector (5) from hull.

8.

Pull harness (4) through hole in hull top. Leave connector (5), rubber bushing (3), washer (2), and nut (1) on harness.

9.

Remove screw (6), locknut (7), clamp (8), and harness (4) from upper bilge tube clamp (9). Discard locknut.

10. Remove two screws (10), lockwashers (11), clamps (12), and harness (4) from two lower bilge tube clamps (13).

Discard lockwashers.

028800-3