TM-9-2350-261-20-2

CARRIER, M113A2, M577A2, M1064, M1068, M1059 AND M901A1

TECHNICAL MANUAL; UNIT MAINTENANCE MANUAL - VOLUME 2 OF 4

TM-9-2350-261-20-2 - Page 394 of 1008

TM 9-2350-261-20-2

REPLACE REAR MAIN WIRING HARNESS (M1064 ONLY) — Continued

0288 00

41. If personnel heater is installed, disconnect circuit 400 lead (1) from heater control box lead.

42. If engine coolant heater is installed, disconnect circuit 400A lead (2) from engine coolant heater control box lead.

43. Remove clip (3) and harness (4) from cradle (5).

44. Remove two locknuts (6), mounts (7) and (8), washers (9), and screws (10) that secure instrument panel (11) to two

struts (12). Discard locknuts.

45. Support panel (11). Remove two screws (13), one internal tooth lockwasher (14), and ground lead (15) from two panel

mounts (16) and bracket (17). Discard lockwasher.

46. Lower panel (11) and support on two struts (12) to gain access to rear of instrument panel.

0288 00-10