TM-9-2350-261-20-2

CARRIER, M113A2, M577A2, M1064, M1068, M1059 AND M901A1

TECHNICAL MANUAL; UNIT MAINTENANCE MANUAL - VOLUME 2 OF 4

TM-9-2350-261-20-2 - Page 401 of 1008

TM 9-2350-261-20-2

REPLACE REAR MAIN WIRING HARNESS (M1064 ONLY) — Continued

0288 00

19. Attach twine (1) that was left in transverse beam (2) to circuit 38 lead (3). Pull lead through transverse beam into

personnel compartment. Remove twine from lead.

20. Secure circuit 38 lead (3) to three weldnuts (4) on transverse beam with three clamps (5), screws (6), and new

lockwashers (7).

21. Connect circuit 38 lead (3) to dome light (8).

22. Install harness (9) in two cradles (10) and secure with clips (11).

23. Install circuit 48 lead (12) and new grommet (13) in battery box (14).

24. Install circuit 6 lead (15) and circuit 48 lead (12) on battery terminal (16). Secure with screw (17) and nut (18).

0288 00-17