TM-9-2350-261-20-2

CARRIER, M113A2, M577A2, M1064, M1068, M1059 AND M901A1

TECHNICAL MANUAL; UNIT MAINTENANCE MANUAL - VOLUME 2 OF 4

TM-9-2350-261-20-2 - Page 400 of 1008

TM 9-2350-261-20-2

REPLACE REAR MAIN WIRING HARNESS (M1064 ONLY) — Continued

0288 00

14. Position ground lead (1) at forward hole of bracket (2). Secure instrument panel (3) to bracket (2) with two panel mounts

(4), screws (5), and new internal tooth lockwasher (6).

15. Secure panel (3) to two struts (7) with two mounts (8) and (9), screws (10), washers (11), and new locknuts (12).

16. Secure harness (13) to cradle (14) with clip (15).

17. If engine coolant heater is installed, connect circuit 400A lead (16) to engine coolant heater control box lead.

18. If personnel heater is installed, connect circuit 400 lead (17) to heater control box lead.

0288 00-16