TM-9-2350-261-20-2

CARRIER, M113A2, M577A2, M1064, M1068, M1059 AND M901A1

TECHNICAL MANUAL; UNIT MAINTENANCE MANUAL - VOLUME 2 OF 4

TM-9-2350-261-20-2 - Page 398 of 1008

REPLACE REAR MAIN WIRING HARNESS (M1064 ONLY) — Continued

4.

Connect circuit 450 lead (1) to lower circuit breaker (6).

5.

Install circuit 400 lead (7) and new grommet (8) in distribution box (4).

6.

Install circuit 6 (9), circuit 2 (10), and circuit 400 (7) leads on bus bar (11) on master switch (12). Secure with screw

(13) and new locknut (14).

NOTE

Inspect gasket on distribution box. Replace if damaged.

7.

Install master switch panel (15) on distribution box (4). Secure with eight screws (16), washers (17), and new locknuts

(18).

8.

Connect circuit 37 lead (19) to master switch panel lead (20).

0288 00-14

0288 00

TM 9-2350-261-20-2