TM-9-2350-261-20-2
CARRIER, M113A2, M577A2, M1064, M1068, M1059 AND M901A1
TECHNICAL MANUAL; UNIT MAINTENANCE MANUAL - VOLUME 2 OF 4
TM-9-2350-261-20-2 - Page 41 of 1008
TM 9-2350-261-20-2
REPLACE THERMOSTAT HOUSING TO ENGINE COOLANT TUBE
0201 00
THIS WORK PACKAGE COVERS:
Removal (page 0201 00-1).
Installation (page 0201 00-2).
INITIAL SETUP:
Maintenance Level
Unit
Tools and Special Tools
General Mechanic’s Tool Kit (WP 0780 00, Item 29)
Torque Wrench (WP 0780 00, Item 102)
Materials/Parts
Sealing compound (WP 0782 00, Item 60)
Sealing compound (WP 0782 00, Item 62)
Gasket
Lockwasher (2)
Personnel Required
Unit Mechanic
Equipment Condition
Engine stopped/shutdown (see your -10)
Carrier blocked (see your -10)
Trim vane lowered and power plant front access door
open (see your -10)
Cooling system drained (WP 0193 00)
REMOVAL
NOTE
Plug (1) should be removed only if you see leakage.
1.
Remove two screws (2), lockwashers (3), and flat washers (4) securing elbow (5) to engine. Discard lockwashers.
2.
Loosen two clamps (6) on hose (7). Move elbow (5), two clamps (8), hose (9), and coolant tube (10) to the left as a unit.
3.
Loosen two clamps (8). Disassemble hose (9), coolant tube (10), and elbow (5).
4.
Remove gasket (11) from elbow (5) or engine block. Discard gasket.
020100-1
Back to Top
