TM-9-2350-261-20-2

CARRIER, M113A2, M577A2, M1064, M1068, M1059 AND M901A1

TECHNICAL MANUAL; UNIT MAINTENANCE MANUAL - VOLUME 2 OF 4

TM-9-2350-261-20-2 - Page 681 of 1008

TM 9-2350-261-20-2

REPLACE DIFFERENTIAL TO OIL COOLER HOSE AND FITTINGS — Continued

0360 00

WARNING

Adhesive, primer, sealant compounds, and isopropyl alcohol are toxic and flammable. These

compounds are toxic to eyes, skin, and respiratory tract. Continued exposure can make you

dizzy and irritate your eyes and throat.

Always use in well ventilated areas, away from heat, sparks, and flames. Do not breathe fumes.

Do not allow into contact with skin and eyes. Use goggles or face shield and protective gloves.

14. Apply a thin coat of primer N and sealing compound only to threads of elbow (12) that are being installed into adapter

(11).

15. Install elbow (12) in adapter (11).

16. Connect oil hose (6) to elbow (12) at differential.

17. Fill differential (WP 0120 00).

18. Start engine (see your -10). Check for oil leaks.

FOLLOW-THROUGH STEPS

1.

Stop/shutdown engine (see your -10).

2.

Install driver’s power plant access panel (WP 0430 00).

3.

Install hull bottom access cover (WP 0434 00).

4.

Close power plant front access door and raise trim vane (see your -10).

END OF TASK

0360 00-5/6 blank