TM-9-2350-261-20-2

CARRIER, M113A2, M577A2, M1064, M1068, M1059 AND M901A1

TECHNICAL MANUAL; UNIT MAINTENANCE MANUAL - VOLUME 2 OF 4

TM-9-2350-261-20-2 - Page 678 of 1008

TM 9-2350-261-20-2

REPLACE DIFFERENTIAL TO OIL COOLER HOSE AND FITTINGS — Continued

0360 00

5.

Disconnect oil hose (1) from elbow (5) at oil cooler (6).

6.

Remove elbow (5) from oil cooler (6).

7.

Remove screw (7) and clamp (8) from oil cooler (6).

8.

Remove hose (1) from carrier.

9.

Disconnect oil filter hose (9) from elbow (10).

10. Remove elbow (10) from oil cooler (6).

11. Disconnect filter hose (9) from elbow (11) on filter (12). Use adjustable wrench.

INSPECTION-ACCEPTANCE AND REJECTION CRITERIA

1.

Clean hoses, fittings, hardware, and differential housing for leaks, cracks, and wear. Replace as needed.

INSTALLATION

1.

Install oil filter hose (1) in carrier.

2.

Connect filter hose (1) to elbow (2) on filter (3). Use adjustable wrench.

WARNING

Adhesive, primer, sealant compounds, and isopropyl alcohol are toxic and flammable. These

compounds are toxic to eyes, skin, and respiratory tract. Continued exposure can make you

dizzy and irritate your eyes and throat.

Always use in well ventilated areas, away from heat, sparks, and flames. Do not breathe fumes.

Do not allow into contact with skin and eyes. Use goggles or face shield and protective gloves.

3.

Apply a thin coat of primer N and sealing compound only to threads of elbow (4) that are being installed into cooler (5).

4.

Install elbow (4) in oil cooler (5).

5.

Connect filter hose (1) to elbow (4).

0360 00-2