TM-9-2350-261-20-2

CARRIER, M113A2, M577A2, M1064, M1068, M1059 AND M901A1

TECHNICAL MANUAL; UNIT MAINTENANCE MANUAL - VOLUME 2 OF 4

TM-9-2350-261-20-2 - Page 669 of 1008

TM 9-2350-261-20-2

REPLACE DIFFERENTIAL OIL PUMP TO DIFFERENTIAL

HOSE AND FITTINGS

0358 00

THIS WORK PACKAGE COVERS:

Removal (page 0358 00-1).

Inspection-Acceptance and Rejection Criteria (page 0358 00-2).

Installation (page 0358 00-2).

INITIAL SETUP:

Maintenance Level

Unit

Tools and Special Tools

General Mechanic’s Tool Kit (WP 0780 00, Item 29)

Pipe Wrench (WP 0780 00, Item 93)

Materials/Parts

Sealing compound (WP 0782 00, Item 65)

Locknut

Preformed packing (2)

Personnel Required

Unit Mechanic

References

See your -10

WP 0120 00

WP 0318 00

Equipment Condition

Engine stopped/shutdown (see your -10)

Carrier blocked (see your -10)

Trim vane lowered (see your -10)

Power plant front access door open (see your -10)

Hull bottom access cover removed (WP 0434 00)

REMOVAL

1.

Drain differential oil into suitable container (WP 0120 00).

2.

Remove differential high oil temperature switch (WP 0318 00).

3.

Disconnect differential oil hose quick disconnect coupling (1).

4.

Disconnect differential oil hose (2) from elbow (3).

5.

Remove elbow (3) from quick disconnect coupling half (4).

6.

Remove quick disconnect coupling half (5) and preformed packing (6) from elbow (7). Discard packing.

7.

Remove elbow (7), nut (8), retainer (9), and preformed packing (10) from differential oil pump (11). Discard packing.

8.

Remove locknut (12), screw (13), washer (14), clamp (15), and differential oil hose (2) from hull crossbeam. Discard

locknut.

035800-1

Suitable Container