TM-9-2350-261-20-3

CARRIER, M113A2, M577A2, M1064, M1068, M1059 AND M901A1

TECHNICAL MANUAL; UNIT MAINTENANCE MANUAL - VOLUME 3 OF 4

TM-9-2350-261-20-3 - Page 283 of 932

TM 9-2350-261-20-3

REPLACE/REPAIR OPERATOR’S SEAT (M1059 ONLY) — Continued

0488 00

INSTALLATION

1.

Install cushion (1) and two retainers (2) on seat back (3). Secure with four screws (4).

2.

Install cushion (5) and two retainers (6) on pan (7). Secure with four screws (8).

3.

Install retainer (9) and two screws (10) on pan (7) and cushion (5).

4.

Install seat belt (11) on bracket (12). Secure with screw (13), washer (14), and new locknut (15). TIGHTEN LOCKNUT

TO 264-288 LB-IN (30-32 N·M) TORQUE. Use torque wrench and socket wrench set.

5.

Install bracket (12) on box beam. Secure with two screws (16) and new lockwashers (17). TIGHTEN SCREWS TO

264-288 LB-IN (30-32 N·M) TORQUE. Use torque wrench and socket wrench set.

6.

Install seat belt (18) on bracket (19). Secure with screw (20), washer (21), and new locknut (22). TIGHTEN LOCKNUT

TO 264-288 LB-IN (30-32 N·M) TORQUE. Use torque wrench and socket wrench set.

7.

Install four quick release pins (23) on seat bracket (19) and sponson bracket (24).

END OF TASK

0488 00-5/6 blank