TM-9-2350-261-20-3

CARRIER, M113A2, M577A2, M1064, M1068, M1059 AND M901A1

TECHNICAL MANUAL; UNIT MAINTENANCE MANUAL - VOLUME 3 OF 4

TM-9-2350-261-20-3 - Page 578 of 932

TM 9-2350-261-20-3

REPLACE RAMP SEAL — Continued

0570 00

INSTALLATION

NOTE

Trim seal to fit.

1.

Place lower seal (4) on rear bulkhead. Bend three retaining strips (3) down on seal to secure in place.

2.

Place upper seal (2) on rear bulkhead. Bend retaining strip (1) down on seal to secure in place.

FOLLOW-THROUGH STEPS

1.

Start engine (see your -10).

2.

Perform ramp seal chalk test (WP 0556 00).

3.

Stop engine (see your -10).

END OF TASK

0570 00-2