TM-9-2350-261-20-3

CARRIER, M113A2, M577A2, M1064, M1068, M1059 AND M901A1

TECHNICAL MANUAL; UNIT MAINTENANCE MANUAL - VOLUME 3 OF 4

TM-9-2350-261-20-3 - Page 573 of 932

TM 9-2350-261-20-3

REPLACE RAMP DOOR HANDLES AND SHAFT

0569 00

THIS WORK PACKAGE COVERS:

Removal (page 0569 00-1).

Installation (page 0569 00-2).

Adjustment (page 0569 00-3).

INITIAL SETUP:

Maintenance Level

Unit

Tools and Special Tools

General Mechanic’s Tool Kit (WP 0780 00, Item 29)

Materials/Parts

Locknut

Preformed packing

Spring pin

Personnel Required

Unit Mechanic

Equipment Condition

Engine stopped (see your -10)

Carrier blocked (see your -10)

Ramp raised and locked (see your -10)

REMOVAL

1.

Remove spring pin (1), two washers (2), and door lock (3) from mount on ramp. Discard spring pin.

2.

Remove locknut (4), inside handle (5), inside washer(s) (6) from shaft (7) of outside handle (8). Discard locknut.

3.

Remove key (9) from shaft (7).

4.

Remove handle (8) from ramp (10). Remove outside washer(s) (11) and packing (12) from handle. Discard packing.

056900-1