TM-9-2350-261-20-3
CARRIER, M113A2, M577A2, M1064, M1068, M1059 AND M901A1
TECHNICAL MANUAL; UNIT MAINTENANCE MANUAL - VOLUME 3 OF 4
TM-9-2350-261-20-3 - Page 563 of 932
TM 9-2350-261-20-3
REPLACE WIRE ROPE AND PULLEYS (M1064 ONLY)
0565 00
THIS WORK PACKAGE COVERS:
Removal (page 0565 00-1).
Installation (page 0565 00-2).
INITIAL SETUP:
Maintenance Level
Unit
Tools and Special Tools
General Mechanic’s Tool Kit (WP 0780 00, Item 29)
Materials/Parts
Cotter pins (4)
Personnel Required
Unit Mechanic
Equipment Condition
Engine stopped (see your -10)
Carrier blocked (see your -10)
Ramp lowered (see your -10)
Rear floor plate removed (WP 0437 00)
Wire rope disconnected from ramp cylinder
(WP 0593 00)
REMOVAL
1.
Remove cotter pin (1), headed pin (2), and wire rope (3) from ramp mount bracket. Discard cotter pin.
2.
Remove three cotter pins (4), headed pins (5), and pulleys (6) from pulley mount. Discard cotter pins.
3.
Remove wire rope (3) from carrier.
056500-1
Back to Top
