TM-9-2350-261-20-3

CARRIER, M113A2, M577A2, M1064, M1068, M1059 AND M901A1

TECHNICAL MANUAL; UNIT MAINTENANCE MANUAL - VOLUME 3 OF 4

TM-9-2350-261-20-3 - Page 559 of 932

TM 9-2350-261-20-3

REPLACE RAMP LINKAGE (M577A2 AND M1068 ONLY) — Continued

0563 00

15. Align clevis (24) with arm (3). Secure with headed pin (25) and new cotter pin (26).

16. Tighten all locknuts.

17. Adjust ramp lock (WP 0561 00).

FOLLOW-THROUGH STEPS

WARNING

Falling ramp could cause severe injuries. Keep personnel clear of ramp area.

1.

Start engine (see your -10).

2.

Raise and lock ramp (see your -10). Check that ramp lever and cable operate properly.

3.

Stop engine (see your -10).

END OF TASK

0563 00-5/6 blank