TM-9-2350-261-20-3

CARRIER, M113A2, M577A2, M1064, M1068, M1059 AND M901A1

TECHNICAL MANUAL; UNIT MAINTENANCE MANUAL - VOLUME 3 OF 4

  TM-9-2350-261-20-3 - Page 556 of 932

TM 9-2350-261-20-3
REPLACE RAMP LINKAGE (M577A2 AND M1068 ONLY) — Continued
0563 00
REMOVAL
WARNING
Falling ramp could cause severe injuries. Keep personnel clear of ramp area.
1.
Remove cotter pin (1), headed pin (2), and clevis (3) from arm (4). Discard cotter pin.
2.
Remove cotter pin (5), headed pin (6), and clevis (7) from lever (8). Discard cotter pin.
3.
Remove two cotter pins (9), headed pins (10), and eyebolts (11) from arms (12) and (13). Discard cotter pins.
4.
Remove eyebolt (11) from clevis (7).
5.
Loosen two locknuts (14). Remove two adjusting screws (15) and locknuts from two hull brackets (16). Discard
locknuts.
6.
Remove eight screws (17), key washers (18), and four supports (19) with arm assembly from hull top plate. Discard
key washers.
7.
Remove locknut (20) and screw (21) from arm (4). Discard locknut.
8.
Remove two screws (22) from connector (23).
9.
Remove arm (12) from connector (23) and key (24) from arm.
0563 00-2


Back to Top