TM-9-2350-261-20-3

CARRIER, M113A2, M577A2, M1064, M1068, M1059 AND M901A1

TECHNICAL MANUAL; UNIT MAINTENANCE MANUAL - VOLUME 3 OF 4

TM-9-2350-261-20-3 - Page 561 of 932

TM 9-2350-261-20-3

REPLACE WIRE ROPE AND PULLEYS (ALL EXCEPT M1064)

0564 00

THIS WORK PACKAGE COVERS:

Removal (page 0564 00-1).

Installation (page 0564 00-2).

INITIAL SETUP:

Maintenance Level

Unit

Tools and Special Tools

General Mechanic’s Tool Kit (WP 0780 00, Item 29)

Materials/Parts

Cotter pin (3)

Spring pin

Personnel Required

Unit Mechanic

Equipment Condition

Engine stopped (see your -10)

Carrier blocked (see your -10)

Ramp lowered (see your -10)

Rear floor plate removed (WP 0436 00)

Wire rope disconnected from ramp cylinder

(WP 0593 00)

REMOVAL

1.

Remove spring pin (1), two washers (2), and guard (3) from upper pulley mount. Discard spring pin.

2.

Remove cotter pin (4), headed pin (5), and wire rope (6) from ramp mount bracket. Discard cotter pin.

3.

Remove two cotter pins (7), headed pins (8), and pulleys (9) from pulley mount. Discard cotter pins.

4.

Remove wire rope (6) from carrier.

056400-1