TM-9-2350-261-20-3

CARRIER, M113A2, M577A2, M1064, M1068, M1059 AND M901A1

TECHNICAL MANUAL; UNIT MAINTENANCE MANUAL - VOLUME 3 OF 4

TM-9-2350-261-20-3 - Page 654 of 932

TM 9-2350-261-20-3

REPLACE/REPAIR HYDRAULIC TANK — Continued

0585 00

7.

Remove elbow (1) from bottom of hydraulic tank (2).

8.

Remove sight glass (3) and packing (4) from side of tank (2). Discard packing.

9.

Remove pressure relief valve (5) and packing (6) from adapter (7). Discard packing.

10. Remove adapter (7) and elbow (8) from tank (2).

11. Remove breather (9) from bushing (10).

12. Remove bushing (10) and gasket (11) from top of tank (2). Discard gasket.

13. Remove elbow (12) from tank (2).

14. Remove four screws (13), tab washers (14), adapter (15), and strainer (16) from tank (2). Discard tab washers.

15.

Remove elbow (17) and packing (18) f

ro m adapter (15).

Discard packing.

CLEAN, INSPECT, AND REPAIR

1.

Check all hoses, valves, adapters, bushings, and strainer for cracks, wear, and damage. Replace if needed.

INSTALLATION

WARNING

Adhesive, primer, sealant compounds, and isopropyl alcohol are toxic and flammable. These

compounds are toxic to eyes, skin, and respiratory tract. Continued exposure can make you

dizzy and irritate your eyes and throat.

Always use in well ventilated areas, away from heat, sparks, and flames. Do not breathe fumes.

Do not allow into contact with skin and eyes. Use goggles or face shield and protective gloves.

0585 00-4